Hardware

Laser Engraver – SculptFun S9

Table of Contents

i'm waiting the parts to arrive please be patient

Links

Overview

				
					I assambled it in maybe 30 minutes. 
It comes with a EU cable, you need a adapter or an other cable for CH socket.
I would recommand to buy LightBurn Software it is worth it.

				
			

Dimensions

				
					All measurements are in "cm"
48 x 53 - inside frame
51 x 56 - perforated sheet metal (if you want buy one, with those measurements you will have 1cm space to the frame)
52 x 57 - outside frame
52.5 x 57.5 – outside with feet
57 x 61 - absolute maximum
				
			

Goal

				
					Encolser
Endstops
Air Assist
Drag Chain
Top Cam (Engraving)
Bottom Cam (Cut check)
Air Exhaust
Working Plate / perforated Plate
? MQTT Messages (ESP32)
				
			

Encloser

				
					Cut MDF Wood Cost approximately: 41.46Fr.-. Without side box
				
			

Endstops

Air Assist

Drag Chain

Air Exhaust

Top Cam (Engraving)

Bottom Cam (Cut check)

Working Plate

ESP32 Controller

Laptop cooling – ThrottleStop

Table of Contents

Links

How to lower Voltage for you CPU/GPU with ThrottleStop. This works only with a Intel CPU!

I use a Intel Core i7 9750H CPU in a Acer Predator Triton 500 PT515-51

All you do with ThrottleStop is on your own risk!!

Starter Code Still in Progress

				
					1. Download / Install ThrottleStop.
1.1 optional Download / Install HWMonitor for better monitoring.
				
			
				
					Set Settings like in the picture if you have a Intel Core i7 9750H else search in the internet for settngs or do it by try and error.
The "OnTop" Setting is only that the Window is Always on Top that you should uncheck!

This are my allDayLong settings, Disable Turbo Settings can be a huge impact on the Cooling Performance.

Click on FIVR and TPL the change the Settings
				
			
				
					i'm tesing around turbo mode. I use this atm, works fine so far.